acrylic panels for swimming pools Manufacturers

Introduction:Aquarium viewing.

Acrylic furniture first appeared in Europe and developed in the 1990s. It was not until the 21st century that acrylic furniture achieved significant development. In high-end hotels and villas, you can see acrylic furniture in the field of home decoration.

Introduction: 100% virgin Mitsubishi, super big indoor aquarium view acrylic windows installation.

About acrylic properties as following 1. Mechanical properties 1.1 Polymethyl methacrylate has good comprehensive mechanical properties and ranks in the forefront of general-purpose plastics. The tensile, bending, and compression strengths are all higher than polyolefins, and higher than polystyrene, polyvinyl chloride, etc., and the impact toughness is poor. , But also slightly better than polystyrene. The cast bulk polymerized polymethyl methacrylate sheet (such as aerospace plexiglass sheet) has higher tensile, bending, and compression mechanical properties, and can reach the level of engineering plastics such as polyamide and polycarbonate.

PMMA has a certain degree of water absorption, and its water absorption rate reaches 0.3-0.4%, while the humidity of injection molding must be below 0.1%, usually 0.04%. The presence of water causes bubbles, gas lines, and reduced transparency in the melt. So it needs to be dried. The drying temperature is 80-90°C, and the drying time is more than 3 hours. In some cases, 100% recycled materials can be used. The actual amount depends on the quality requirements, usually more than 30%. The recycled materials should avoid pollution, otherwise it will affect the transparency and the properties of the finished product.

Acrylic glass has outstanding inductive mechanics function and ranks in the forefront of general plastics.