aquarium building Manufacturers

During the transportation process of the acrylic swimming pool project, do not rub the outer protective film or protective paper. Due to the complexity of...

Introduction: The 111-141-square-meter duplex suite has an underwater landscape observed through acrylic clear windows.

Introduction: L Shape bonding acrylic window.

PMMA has a certain degree of water absorption, and its water absorption rate reaches 0.3-0.4%, while the humidity of injection molding must be below 0.1%, usually 0.04%. The presence of water causes bubbles, gas lines, and reduced transparency in the melt. So it needs to be dried. The drying temperature is 80-90°C, and the drying time is more than 3 hours. In some cases, 100% recycled materials can be used. The actual amount depends on the quality requirements, usually more than 30%. The recycled materials should avoid pollution, otherwise it will affect the transparency and the properties of the finished product.

Acrylic sheet is made of methyl methacrylate monomer (MMA), that is, polymethyl methacrylate (PMMA) sheet organic glass. Acrylic sheet processed by special technology has the reputation of "plastic queen". The physical properties of acrylic determine that it is the only choice for transparent swimming pool materials. It has the following advantages：

Project case name: Seaside Hotel Swimming Pool Window Project Size: L5200*W1300*T100mm Project case time:2025/8/22 Country: Mexico Introduction: 100mm Thickness Cast Block Acrylic Sheet for Swimming Pool Window.