pattern acrylic rod, Manufacturers

Introduction: The acrylic window panel size is 4900*1650mm, thickness 100mm.

Today, acrylic swimming pool are increasingly dominant. Its beautiful appearance, rich functions, simple installation, easy to operate and other advantages, pool builders have chosen to use acrylic materials to do the pool. So now the problem also appears, in the use of acrylic material of the pool should pay attention to some problems?

The two acrylic tanks are about to be sent to the UK for display in the hotel cafeteria and living room. We look forward to the final effect after adding water, corals and fish.

PMMA has a certain degree of water absorption, and its water absorption rate reaches 0.3-0.4%, while the humidity of injection molding must be below 0.1%, usually 0.04%. The presence of water causes bubbles, gas lines, and reduced transparency in the melt. So it needs to be dried. The drying temperature is 80-90°C, and the drying time is more than 3 hours. In some cases, 100% recycled materials can be used. The actual amount depends on the quality requirements, usually more than 30%. The recycled materials should avoid pollution, otherwise it will affect the transparency and the properties of the finished product.

Project case name：Government Large Aquarium Acrylic Sheet Window Project case time： 2023/8/9 Country：Romania Introduction: Kingsign® customized 120mm thickness curved clear acrylic sheet window and 50mm thickness flat acrylic window

The beautiful scenery in front of you is integrated with the acrylic swimming pool.